LTL vs. Full Truckload: Choosing the Right Shipping Mode
How LTL pricing works, when truckload wins, and the middle options — volume LTL and partial truckload — most shippers overlook.
Pick the wrong mode and you either pay truckload rates for freight that belonged on an LTL trailer, or pay LTL accessorials and re-class risks on freight that filled the whole truck anyway. The decision comes down to three things: how much space your freight needs, how many times you're willing to let it be handled, and how fast it has to arrive.
LTL: shared trailer, shared cost
Less-than-truckload (LTL) consolidates freight from multiple shippers on one trailer. You pay only for the space you use, priced from weight and freight class. The trade-off is handling: your pallets are forklifted on and off trailers at each terminal hub, which takes longer and creates more chances for damage. LTL is usually the right call for shipments from one to six pallets, and it's the only mode where the NMFC class system directly sets your rate — which is why accurate classification matters most here.
FTL: one truck, one shipper
Full truckload (FTL) means your freight alone fills — or reserves — a trailer. Nothing is consolidated, the freight is loaded once and unloaded once, and transit is typically faster and more predictable. Pricing is negotiated per lane and per market rather than per class. As a rule of thumb, if your shipment fills more than half a 53-foot trailer (roughly 12+ linear feet or 12+ pallets), truckload rates start to compete with — or beat — LTL.
The middle ground most shippers miss
- Volume LTL: priced like LTL but for larger shipments, often with fewer touches and better rates than standard LTL tariffs.
- Partial truckload: your freight shares a trailer but isn't cross-docked through terminals; class matters less, linear feet matters more.
- Intermodal: the trailer rides a rail for the long haul — slower, but often cheaper on long national lanes.
| Factor | LTL | Full truckload |
|---|---|---|
| Typical size | 1–6 pallets | 12+ pallets or full trailer |
| Pricing basis | Weight × freight class | Per-lane market rate |
| Handling | Multiple terminal transfers | Loaded once, unloaded once |
| Transit | Slower, hub-dependent | Faster, more direct |
| Damage risk | Higher (more handling) | Lower |
| Documentation | BOL with NMFC class required | BOL, class not rate-critical |
Getting class right either way
Even on truckload freight, the BOL needs a correct NMFC item number and class — and if part of the load moves LTL, class decides the price. Look up your items, calculate density, and generate a clean BOL before tendering either mode.
Find your carrier’s identifier with the free SCAC code lookup.