Find NMFC

How to Calculate Density-Based Freight Class, Step by Step

Measure, weigh, and convert your way to the right PCF — and the right class — with a worked example you can follow along.

For most LTL freight, class is decided by one number: density. Getting that number right the first time prevents re-weighs, re-classes, and surprise invoices. Here is the exact process carriers use, with a worked example.

Step 1: Measure the finished shipment

Measure the length, width, and height of each handling unit — pallet, crate, or skid — after it's fully packed. Always include the pallet itself (a standard GMA pallet adds about 5–6 inches of height and roughly 30–50 lbs) and anything that protrudes: overhang, straps, corners of the crates. Measure in inches and round each dimension up to the next whole inch. Carriers round up; so should you.

Multiple handling units? If your shipment is two pallets of different sizes, calculate total cubic feet across all units, then divide total weight by that total. Never average the pallets' densities.

Step 2: Convert to cubic feet

Multiply length × width × height in inches to get cubic inches, then divide by 1,728 (12 × 12 × 12) to get cubic feet. For example, a pallet measuring 48 × 40 × 50 inches holds 48 × 40 × 50 = 96,000 cubic inches, which is 96,000 ÷ 1,728 = 55.56 cubic feet.

Step 3: Weigh the shipment

Weigh the shipment complete — freight, packaging, pallets, and blocking. Use a real scale, not an estimate from the packing slip. If the shipment has multiple handling units, add their weights together. Carriers re-weigh on certified scales, and a guess that's off by 10% is one of the most common causes of billing corrections.

Step 4: Divide weight by cubic feet

Density (PCF) = total weight ÷ total cubic feet. Continuing the example: if that 55.56-cubic-foot pallet weighs 580 lbs, density is 580 ÷ 55.56 = 10.44 PCF.

Step 5: Match density to the class scale

For density-based NMFC items, match your density to the item's allowed classes. Where the general scale applies, it looks like this:

ClassDensity (lb per cubic foot)
5050 and above
5535 – 50
6030 – 35
6522.5 – 30
7015 – 22.5
8512 – 15
1009 – 12
1258 – 9
1507 – 8
1756 – 7
2006 or less
250 – 500Low-density and irregular freight

Our example at 10.44 PCF lands in the 9–12 range: class 100. Note that individual NMFC items often have their own breakpoints that differ from this general scale — always check the item's listing, which our search shows alongside every result.

Skip the math

Enter dimensions and weight into our free density calculator and it returns cubic feet, PCF, and the recommended class instantly — including the breakpoints for your specific NMFC item. Save the shipment and the numbers flow straight onto your BOL.

Find your carrier’s identifier with the free SCAC code lookup.